1/4″ Pre-Filter
9.798 Ft
Skip to product information
1/4″ Pre-Filter
9.798 Ft
This pre-filter is intended to be used alongside the Atlas Scientific 1/4” flow meter.
If water with particulate matter will be passing through the flow meter, a pre-filter of at least 80 microns must be used. The blades of the paddle wheel can become jammed by debris if you are not using a pre-filter. Jammed paddle wheel blades will not damage the flow meter; however, it will not be possible to get accurate flow readings until the blockage has been removed.
Specifications
| • 80 Mesh stainless steel pre-filter (178 microns) | |
| • 1/4” Male NPT Input/Output | |
| • Max pressure of 861 kPa (120 PSI) | |
| • Max temp 100°C (212°F) |